Pfaff 8310-041

Input
61
Function selection
These functions are used to select the code number for the function to be locked or re-
leased.
Locking/releasing
These functions are used to lock or release the function for the appropriate user.
Allocation of the code numbers
Code number Function Symbol
F ... 0 Program selection
F ... 1 Creating/altering sealing programs
F ... 2 Input mode
F ... 3 Further settings
F ... 4 Feed roller parameters
F ... 5 "Feed unit" backwards after stop
F ... 6 "Feed unit" forwards after end
F ... 7 Amplitude/power window
,
F ... 8 Flip-flop mode (pedal)
F ... 9 T-seam mode
F ... 10 Amplitude/power switch
,
F ... 11 not assigned
F ... 12 Country settings
F ... 13 Rights of access
F ... 14 Program management
F ... 15 Service menu
F ... 16 Carry out a cold start
F ... 17 Machine configuration
F ... 18 Load software