Pfaff Creative 2140 - Combine Embroidered Word Sequences, with the Embroidery Template; Creating a Directory in the Creative Data Manager

6-26
6.
Embroidery
Assistant
In the
“Sequence/Combination”
1
“Embroidery
Combination”
menu, you can
compile
several
designs
into a
embroidery combination
within
a hoop
and save
it
permanently.
Use
the
embroidery template,
to place
several embroidery
combinations
on
a
piece
of fabric to
make
up a
large
pattern.
Tip:
Single
designs
can also
be
selected for
the
embroi
dery
combination
and saved permanently.
If you
change
the
settings of your designs (like
mirroring,
rotating,
orbiting),
these
changes will also
be
saved.
This way you
can always call
up a
design with its
changed
settings in order to embroider
it again,
even
if the machine
has been switched
off
in-between.
Combine
embroidered
word sequences,
with
the
embroidery
template
When you
enter an entire word sequence
in the
input field
of the
embroidery
combination, a
line feed
is
automatically
inserted
in the text.
The entire text is
positioned
within the hoop.
To
be
able
to
continue embroidering beyond
the
hoop,
you
must
divide
the
word
sequence
into
sections
before
entering it into
the
machine.
• You can create
these individual
sections, one after
the other,
in the processing screen
and then save
them
under different names in
the machine, even
after
the
machine has been switched
off. For this
purpose,
you
can create a
directory
in
which
you
save
all the
sections.
• Or you
can formulate your
word
sections
and
embroider
each one directly,
without
saving it. (See
“Combine
designs into a large
pattern, using
the
embroidery
template”, page 6-24”).
Using this example we
want to show how you can
create a
directory
in the Creative
Data Manager in order to
save the
different text sections.
You can
then call up these sections
and embroider
them
again using
the
embroidery
template,
at any
time.
Creating a directory
in
the Creative
Data Manager
A
directory is like
a
folder in which
you
store
something.
You can create
as
many folders
as
you want
in the Creative
Data Manager.
To
do
this, touch
F.
FrFmFF
FrFrFF 1 F
FfFFFFE.
FFF.FFFF
FEEm
FrTrF.
F
4
An input field opens
where you can
enter the names
of the
directories.
Confirm
your entry
with . and the
new
folder
appears
in the display.
-.1—-
F:F1:
1
FFF
W[ T F
S8n
We
have
called
our
folder
“Slogan”.