Pfaff Creative 2140 User Manual

7-12
7 Accessories
Braiding
foot
This
special
foot is
best
suited
for
overstitching
heavy/bulky
cords
(i.e.
loosely
twisted
wool)
or
a
narrow
tape/ribbon.
•
Thread
your
cord or
ribbon
through
the wire
loop/guide
at the
front
of the
foot.
Feed
it down
through
the
hole
in
the center
of
the foot
and guide
under
the
foot
and
to
the
back.
•
Attach
the braiding
foot to
the
machine.
Select
a
decorative
stitch
and
thread
of
your
choice
and
overstitch
the
cord or
ribbon.
Stitch
No:
optional
Stitch
length:
according
to
the
stitch
Stitch
width:
according
to the
thread
size
7/9
hole
foot
Beautiful
decorative
effects
can
easily
be
achieved
with
this
presser
foot.
Up
to
9
cords
may
be
overstitched
using
decorative
stitches
and
a
variety
of embroidery
threads.
• Cut
your
cords
to the
desired
length.
Thread
the
cords
through
the holes
in
the foot
from
the top
to the
bottom.
Lead
the
cords
under
the presser
foot and
out
the
back.
Leave
the
thread
tails
extending
about
1
1/2-2”
(4-5
cm)
at the
back.
• Attach
the
7/9
hole
foot.
•
Overstitch
the
9
threads
with
a
decorative
stitch
of
your
choice.
Tip:
Pearl
thread
or embroidery
twist
is well
suited.
Stitch
No: optional
Stitch
length:
according
to
the stitch
Stitch
width:
according
to
the number
of
threads

Pfaff Creative 2140 Specifications

General

Brand	Pfaff
Model	Creative 2140
Category	Sewing Machine
Language	English