Pfaff Creative 2140 User Manual

2. Machine Assistant
2-7
Inserting the bobbin
Insert
the
full
bobbin
in the bobbin case. When doing
so,
pull the
thread sideways through the slot on the bobbin case (A), then under
the
tension
spring (B)
until it rests in the small hook in the opening
(see
arrow).
Check: When
you
pull the thread, the bobbin must turn clockwise.
Checking the bobbin thread ten&on:
Hold the bobbin case by
the thread and move it sharply upwards.
The bobbin
case must
slip downwards
a
little with each hand move
ment.
Correcting the tension
Turn the adjusting
screw
(C)
just
a
little to the left to decrease the
bobbin
thread tension.
Turn the adjusting screw
(C)
just a
little
to the
right
to
increase the
bobbin thread tension.
Inserting the bobbin case
Lift the latch (F) on the
bobbin
case
and push the bobbin case fully
onto the pin (D) of the
sewing hook. The opening (B) of the bobbin
case must face upwards.
Check: Pull the bobbin thread sharply
The bobbin
case
must not
fall
out
of the hook.
Close the hook/bobbin cover.

Pfaff Creative 2140 Specifications

General

Brand	Pfaff
Model	Creative 2140
Category	Sewing Machine
Language	English