Pfaff Creative 2140 - Winding from the Second;Third Spool Pin

2-4
2 Machine
Assistant
1.
Winding
from the
second
spool
pin
Swing
the second
spool pin (20)
up
and
lock. Place
a spool of
thread
with an
appropriate
spool cap
on the
spool pin.
2.
Winding
from
the third spool
pin
Insert
the third spool
pin in
the hole
(21)
provided.
Place
a
spool
of
thread
with an
appropriate
spool cap on
the
spool
pin.
Threading
Place the
thread
into
thread
guide
(A)
from front to
back and pull
it
counter
clockwise
through the
pre-tension
device
(B). Wind the
start
of
the thread
around
the bobbin
several
times in
a
clockwise
direction.
Start
bobbin winding
by
pushing
the bobbin
lever to the
right.
As soon
as
the
bobbin is full,
the winding
action
will
be
stopped
automatically.
Cut the
thread and
remove
the
bobbin
from
the
winder