Benennung Bestellnummer
Mounting kit for DN 200 ISO-K to ISO-F, with collar flange, coated centering
ring with protection screen, hexagon bolts
PM 016 962 -T
Mounting kit for DN 200 ISO-K to ISO-F, with collar flange, coated centering
ring, stud screws
PM 016 965 -T
Mounting kit for DN 200 ISO-K to ISO-F, with collar flange, coated centering
ring with splinter shield, stud screws
PM 016 966 -T
Mounting kit for DN 200 ISO-K to ISO-F, with collar flange, coated centering
ring with protection screen, stud screws
PM 016 967 -T
Mounting kit for HiPace DN 200 ISO-F, including coated centering ring, hexa-
gon screws
PM 016 470 -T
Mounting kit for DN 200 ISO-F, including coated centering ring, splinter shield,
hexagon screws
PM 016 471 -T
Mounting kit for DN 200 ISO-F, including coated centering ring, protective
screen, hexagon screws
PM 016 472 -T
Mounting kit for DN 200 ISO-F, including coated centering ring, stud screws PM 016 475 -T
Mounting kit for DN 200 ISO-F, including coated centering ring, splinter shield,
stud screws
PM 016 476 -T
Mounting kit for DN 200 ISO-F, including coated centering ring, protective
screen, stud screws
PM 016 477 -T
Hexagon Screw Set for Flanges with Through-Holes, DN 200 CF-F PM 016 687 -T
Set of stud screws for flanges with a threaded hole, DN 200 CF-F PM 016 688 -T
Set of stud screws for flanges with through-hole, DN 200 CF-F PM 016 736 -T
Centering ring with multifunction coating, DN 200 ISO-K/-F PM 016 220 -U
Centering ring with multifunction coating and integrated splinter shield, DN 200
ISO-K/-F
PM 016 221 AU
Centering ring with multifunction coating and integrated protection screen, DN
200 ISO-K/-F
PM 016 222 AU
Elastomer seal, FKM, DN 200 CF 402DFL200-S2
Elastomer seal, FKM, DN 200 CF 402DFL200-Z
Copper Gasket, Vacuum-annealed, DN 200 CF 490DFL200-G-S5
Copper Gasket, OFHC-copper, DN 200 CF 490DFL200-S5
Copper Gasket, Silver-plated, Vacuum-Annealed, DN 200 CF 490DFL200-S-G-S5
Copper Gasket, Silver-Plated, DN 200 CF 490DFL200-S-S5
Vibration damper for HiPace 800/1200/1800, DN 200 ISO-K/F PM 006 668 -X
Vibration damper for HiPace 800/1200, DN 200 CF-F PM 006 669 -X
Splinter shield for turbopumps, DN 200 CF-F PM 016 321
Protection screen for DN 200 CF-F PM 016 342
Mains cable 230 V AC, CEE 7/7 to HAN 3A, 3 m P 4564 309 HA
Mains cable 208 V AC, NEMA 6-15 to HAN 3A, 3 m P 4564 309 HB
Mains cable 115 V AC, NEMA 5-15 to HAN 3A, 3 m PM 061 187 -X
RJ 45 interface cable on M12 for HiPace PM 051 726 -T
HPU 001, Handheld Programming Unit PM 051 510 -T
DCU 002, Display Control Unit PM 061 348 AT
Y-connector M12 for RS-485 P 4723 010
Y-Connector, shielded, M12 for accessories P 4723 013
USB RS-485 converter PM 061 207 -T
Interface cable, M12 m straight/M12 m straight, 3 m PM 061 283 -T
Venting valve, shielded, 24 V DC, G 1/8", for connection to TC 400/1200 and
TM 700
PM Z01 291
Sealing gas monitoring unit G 1/8" PM 016 911 -U
Sealing gas valve, shielded for HiPace 400/700/800 P Version with TC 400
and HiPace 1200–2300 with TC 1200
PM Z01 313
Sealing gas throttle for HiPace 400/700/800 P version and HiPace 1200–2300 PM Z01 318
Sealing gas throttle for HiPace 1200–2300 PM Z01 319
Accessories
62/74
To Next Page