(11)Rear brake adjustment (drum brake only)
1.Check the clearance
Of rear brake lever.
Clearance: 10-20mm
2.If the clearance is
beyond the above standard,
Adjust it by rotating the screw.
a. Left-handed rotation-enlarge
the clearance.
b. Right-handed rotation-reduce the clearance.
(12)Tire:
1.Check the tire air pressure(when it’s cold)
2.Tire pressure:
Front tire: 2.0 kg/c ㎡
Rear tire: 2.0 kg/c ㎡
3.Tire dimension:
G-MAX 50:
Front tire: 120/70-12
Rear tire: 130/70-12
G-MAX 125/150/200/220:
Front tire: 120/60-13
Rear tire: 130/60-13
G-MAX 250:
Front tire: 120/60-13
Rear tire: 140/60-13
4.Check is there any sharp Object pierce the tire.
5.Check the depth of tire Thread.
a. Depth(front & rear):
According to mark of tire “▲”to change a new tire
ote:
When the arrow of rear brake indicator align with the arrow of left
crankcase, change the brake lining.
ote:
a. Check and adjust the tire pressure when it is too low.
The pressure is according to the carrier, Driver, passenger, accessories and cruise Speed.
b. Proper loading is very important for steering, riding, braking, performance and safety.
c. Never carry any parcel unfastened.
d. Load the heaviest parcel on the center of vehicle, balancing the weight on both sides.
e. Beware of the weight loaded properly and check the tire pressure. The total weight
of carrier, driver, passenger, and accessories cannot exceed the approved
limit, An overload vehicle is easy to cause tire damage and accident for rider.