System instrument borders and icons glow white. With the ‘Window Frames’ option in ‘Display Options’
enabled, the colors of the Analyzer group and Generator group of tools can be set:
l Analyzer tools color select > [color]
l Generator tools color select > [color]
Color selection is via the HSV (Hue, Saturation, Value) tool shown above using two cursors. The left-hand
color rectangle allows selection of hue (horizontal) and saturation (vertical). The right-hand vertical bar selects
the color lightness.
Instrument borders automatically merge by group color. If one instrument is placed next to another in the
same group, then the border will outline all instruments of a common group in contact with each other to aid
group recognition.
Within instrument windows, signal connectors when active will glow in the Analyzer color to indicate an input
or the Generator color to indicate an output.
Instrument Bar
All instrument windows can be closed simultaneously by right-clicking the ‘Instrument Bar’ to reveal its
submenu, and then selecting ‘Close All Windows’.
In the right-hand corner of the Instrument Bar is the audio monitoring Source icon, and the Time & Date
display.
The audio monitoring icon controls the audio monitoring output of the unit, whether monitoring via HDMI, SDI
instrument monitor output, or 26-way D-type. Click once to mute/unmute. Hovering over the icon reveals the
current audio Source channel/pair selected, and right-clicking the icon additionally reveals an adjustable
sliding volume bar. The audio monitoring source can be selected via the ‘Analyzer - Audio Meters’
instrument.
Right-click the time and date display to reveal submenu for settings modification.
PHABRIX Qx User Manual Page 9
To Next Page
Loading...