Analysis
Analyzer - Picture
The picture view shows the generator pattern currently being analyzed by the Qx. Double-click within
the window to resize it between 1/16 of a screen, 1/4 screen, and full screen.
Blanking Area
In the right-click submenu, the user can enable ‘Show Blanking’. This will offset the picture to the right,
revealing the blanking area.
l Show Blanking > [Enabled, Disabled]
Note: ‘Show Blanking’ is not available for multiple sub-image video standards as the active picture is
separated from the blanking regions during active picture reconstruction.
PHABRIX Qx User Manual Page 33
To Next Page
Loading...