Analysis
Analyzer - Ancillary Inspector
ANC Inspector monitors the analysed signal and displays the contents of selected Ancillary packets within
the SDI data.
The window displays the location of a found packet and the time it was found.
The lower area shows the packet in the hexadecimal form including individual: header words (gray), data
words (black), and checksum (blue). Hovering over each header word reveals more detail.
The main parameter of the ANC Inspector search (Identifier) can be set in the submenu to the ancillary
packet type you are trying to find.
l Identifier > [Any, Custom, S353 MPEG Recoding VANC Space, S353 MPEG Recoding HANC Space,
S305 SDTI, S348 HD-SDTI, S427 Link Encryption Message 1, S427 Link Encryption Message 2, S427
Link Encryption Metadata, S352 Payload ID, S2016-3 AFD, S2016-4 PAN, S2010 ANSI/SCTE, S2031
DVB/SCTE, S2056 MPEG TS, S2068 3D Packing, S2064 Lip Sync, S2108-1 HDR/WCG, ITU-R BT.1685,
OP47 Caption, OP47 VBI/WST, ARIB-TR-B29, RDD18 Metadata, RP214 KLV Metadata VANC Space,
RP214 KLV Metadata HANC Space, RP223 UMID/ID, S2020 Audio Channel Pair 1/2, S2020 Audio
Channel Pair 3/4, S2020 Audio Channel Pair 5/6, S2020 Audio Channel Pair 7/8, S2020 Audio Chan-
nel Pair 9/10, S2020 Audio Channel Pair 11/12, S2020 Audio Channel Pair 13/14, S2020 Audio Channel
Pair 15/16, S2051 Two Frame, RDD8 WSS, S12M-2 V-TCode, S2103 Generic Time, EIA-708 Caption,
EIA-608 Caption, S12-3 HFR TCode, RP207 Program, S334-1 Data, RP208 VBI Data, Mark Deleted,
S299-2 3G Audio Control Group 8, S299-2 3G Audio Control Group 7, S299-2 3G Audio Control
Group 6, S299-2 3G Audio Control Group 5, S299-2 3G Audio Audio Group 8, S299-2 3G Audio
Audio Group 7, S299-2 3G Audio Audio Group 6, S299-2 3G Audio Audio Group 5, S299-1 HD Audio
Control Group 4, S299-1 HD Audio Control Group 3, S299-1 HD Audio Control Group 2, S299-1 HD
Audio Control Group 1, S299-1 HD Audio Audio Group 4, S299-1 HD Audio Audio Group 3, S299-1 HD
Audio Audio Group 2, S299-1 HD Audio Audio Group 1, S272 SD Audio Control Group 4, S272 SD
Audio Control Group 3, S272 SD Audio Control Group 2, S272 SD Audio Control Group 1, S315 Cam-
era Pos, RP165 EDH, S272 SD Audio Group 4 Ext, S272 SD Audio Audio Group 4, S272 SD Audio
Group 3 Ext, S272 SD Audio Audio Group 3, S272 SD Audio Group 2 Ext, S272 SD Audio Audio
Group 2, S272 SD Audio Group 1 Ext, S272 SD Audio Audio Group 1]
Triggers can be set in the instrument submenu, and when ancillary data exactly matching the search
parameter(s) is detected, ANC Inspector will be triggered and display the inspection result in the lower part
of the window.
l Trigger > [None, Single Shot, Continuous]
PHABRIX Qx User Manual Page 49
To Next Page
Loading...