right-click mouse for additional drop- down menus
There is also the option to take a screenshot of the entire display by selecting ‘Take Screenshot’ in the
submenus of any instrument and of many dialog windows belonging to instruments. Alternatively, via a
keyboard, press ‘SHIFT+PrtScn’. Screenshots, in PNG format, can be retrieved from the Qx via a web browser
or SFTP interface.
Note: To successfully take a screenshot, VNC must first be disabled in the ‘Qx Network & Automation‘
instrument submenu.
Certain 'Dialog' windows (About, False colour ranges, Driver Calibration, etc.) also have right-click menus with
options to take a screenshot, dismiss the menu, and close the dialog window.
Double-clicking within a window will cycle through a set of standard instrument sizes. In many cases, the size
of a window can be further adjusted to suit requirements. Click and drag on an instrument’s surface to
reposition the instrument. For instruments with scrolling columns and rows, navigation is further aided by a
scroll control menu - revealed by right-clicking on the scroll bar.
About
Selecting ‘About..’ in the Qx ‘Instrument Launch Menu, reveals a window containing information including: Qx
software version and build, Serial Number; and license, FPGA, and calibration details.
Apply default settings
Applying default settings in the Qx ‘Instrument Launch Menu’ will return the unit’s configuration to its factory
settings. A user will be asked to confirm this choice via an “Are you sure...” prompt box, before factory
defaults are restored.
PHABRIX Qx User Manual Page 11
To Next Page
Loading...