If external reference is not currently being used as system reference, its field text will display in yellow. When
external reference is the system reference, this table field text will be white.
Cable length measurements are displayed for each SDI BNC input. To measure the length of a connected
cable, be sure to first select the correct cable type from the instrument submenu:
l Cable Type > [Belden 8281, Belden 1505, Belden 1694A, Belden 1855A, Canare L5CFB, Image 1000]
The selected cable type is shown below the 'SDI In' BNC connector view.
Note: Cable measurements accurate to approximately +/- 10 meters.
IP Mode
Active IP SFP receive inputs and transmit outputs are indicated by colored connectors. The color of the
connectors corresponds to the color of their related instrument borders and instrument icons, to aid
recognition.
An entirely grayed out connector indicates that a signal is not present. If an SFP is unseated or not present,
this is displayed graphically with a black void - indicating a missing SFP.
SFP type and presence information is shown in tables, as are external reference standard and status
details; as per the SDI version of this UI.
Page 26 PHABRIX Qx User Manual
To Next Page
Loading...