Generator - Configuration
The revamped 'Generator - Configuration' instrument has two tabs: one to select the generator video
standard and test pattern, and one for audio generation. in SDI Stress Toolset Mode, the ' Generate - Video'
submenu includes advanced generation tools which form part of the Advanced SDI Stress Toolset [PHQXO-
SDI-STRESS].
Generate - Video
[Qx 12G / PHQXO-GEN (QxIP)+PHQXO-UHD
(for 12G/6G-SDI on Qx IP)]
With a test pattern selected, click on your chosen video standard to generate it. A traffic light indicator will
turn yellow to show that generation is in progress. The light will turn green once the video standard has been
successfully generated.
Note: In this software revision the pattern may take up to 8 seconds to be generated.
The Qx provides video standard generation for a wide range of SDI rates, resolutions, frame rates, image
mappings, color gamuts, and transfer curves.
To simplify selection, the generator standards list may be filtered via drop down menus using the following
parameters:
l Type > [All, 12G 2-SI, QL 3G A 2-SI, QL 3G A SqDv, QL 3G B 2-SI, QL 3G B SqDv, DL 6G 2-SI, 6G 2-SI,
3G A, 3G B, 1.5G]
l Resolution > [All, 1280x720, 1920x1080, 2048x1080, 3840x2160, 4096x2160]
l Frame > [All, 23.98p, 24p, 25p, 29.97p, 30p, 47.95p, 48p, 50i, 50p, 59.94i, 59.94p, 60i, 60p]
l Mapping > > [All, YCbCr:422:10, YCbCr:422:12, YCbCrA:4224:12, YCbCr:444:10, YCbCr:444:12,
YCbCrA:4444:10, RGB:444:10, RGB:444:12, RGBA:4444:10]
l Gamut > [All, 709, 2020, HLG 2020, PQ 2020, S-Log3 2020]
‘Recent history list…’ provides a list of the most recently generated video standard and test pattern
combinations. These can be quickly selected and regenerated from this drop down menu.
The ‘Status’ bar provides information on video generation progress.
Right-clicking anywhere within the 'Generate - Video' window brings up a configuration submenu.
To clear recent history select:
l Clear recent history list
Page 14 PHABRIX Qx User Manual
To Next Page
Loading...