Analysis
Analyzer - Audio Channel Status
Audio channel status information is detailed in this window.
The audio source is displayed in the top right hand corner of the window and can be selected via the
instrument submenu:
l Input Select > [Sub Image 1, Sub Image 2, Sub Image 3, Sub Image 4, AES IO]
Audio presence is outlined in the upper part of the display. For each channel, one of the following channel
status indicators will be shown:
l -: No audio
l P: PCM audio is present
l D: Dolby Digital packets are present
l +: Dolby Digital Plus packets are present
l E: Dolby E packets are present
l 4: Dolby AC-4 is present
l ?: Unspecified data is present
In the main table channel status, use, data type, emphasis, source lock, frequency, channel mode, word
length, align level, origin, destination, sample address, time, and reliability information is displayed.
Use the horizontal and vertical scroll bars to view all channel columns and all audio status parameters.
Click on a channel column to reveal the raw data for that channel at the bottom of the window.
PHABRIX Qx User Manual Page 51
To Next Page
Loading...