General
Package Contents
The shipping box should contain the following:
PHABRIX Qx 12G unit: PHQX01 or PHQX01E (with Physical Layer Analysis) or
PHABRIX Qx IP unit: PHQX01-IP or PHQX01E-IP (with Physical Layer Analysis);
Power Supply Unit;
Mains lead;
PHABRIX USB Key
General Safety
Avoiding Personal Injury
This instrument is designed for use by qualified personnel only.
No user serviceable parts are provided. Units should be returned to your local PHABRIX agent
for servicing.
The Operator should NOT remove the case from the unit.
Do not spill any liquid onto the unit or its power adaptor.
Power Supply
Make sure that the unit is connected to the correct power supply voltage. A power supply adaptor is
supplied with the unit which may be connected to any AC power supply between 100 and 240VAC at 50-
60Hz. Only the supplied power adaptor should be used with the unit. Do not use a damaged AC cable
with the unit as it may cause a shock or fire hazard. Replacement AC cables are available from your local
PHABRIX agent.
How to Upgrade Software
New software releases will be made available regularly as the product is developed.
Software downloads are approximately 100 MB and can be found in the Support area of the PHABRIX
website currently located at www.phabrix.com/support.asp
Download the .ZIP file.
Extract and copy the ‘phab_qx_upgrade.bin’ file to the root directory of a FAT32 formatted USB stick.
Make sure the unit is turned OFF before upgrading.
Insert the USB into the front panel USB port.
Press the power button TWICE in succession. The power button will glow pink when the upgrade procedure
begins. If the button does not glow pink then repeat the procedure.
The power button will flash several colors and the fans will be on full throughout the upgrade process.
Please wait approximately 4 minutes as the unit upgrades. It will automatically show the menu screen when
complete.
Page VI PHABRIX Qx User Manual
To Next Page
Loading...