20
5.0 Quick Start
This is what it takes to get started
1. Charge the batteries (Described earlier)
2. Install the focusing Screen if needed
3. Consult the Camera specic section for special cabling requirements
for your solution.
4. Insert Battery or connect IEEE1394/FireWire (for power) if capturing
tethered to e.g. a laptop, that can’t provide 10watt, you must force
batterypower in the menu.
5. Insert CF-Card or connect IEEE1394/FireWire (To shoot tethered
directly to the computer) if shooting tethered launch the Capture One
Application
6. Otherwise Shoot the images to CF-card, import them using the
Capture One Application and a card-reader.
To Next Page
Loading...
