63
11.3 Mamiya RZ67 PRO IID
The P+ back for Mamiya 645 AFD series also supports the Mamiya
RZ67 PRO IID via the 645 AFD adaptor plate available from your Phase
One dealer (Part# 70994).
The mode selector on the trigger button should be turned to the white
dot when used with the P+ back.
When the P+ back is placed on the body and not in use, the selector
should be set to the orange dot, to avoid draining the small battery.
Even if the P+ back is turned off, the battery will drain slowly if the
orange dot is not selected
To Next Page
Loading...
