PhaseOne P 65+ - Page 75

75
Image orientation detection
The CCD in P+ back is positioned in landscape orientation.
Whenever an image is captured in portrait position by rotating the
camera, an internal sensor detects this new position and the image will
appear with the correct orientation in the Capture One application.
Camera orientation: Images can be captured in three shown positions
– and will appear with the correct orientation in the Capture One
application.
IR filter on the CCD
The IR lter (Phase One TG1 Infrared cut-off lter) is placed on top of
the CCD.
The lter may not be removed for several reasons.
• The focusing of the P+ back will be damaged.
• It is only possible to remount the lter without dust in between the
lter and the CCD if you have access to special clean room facilities.
• The Phase One Product Warranty is terminated.
Camera orientation: Images can be captured in all three positions – and will appear with
the correct orientation on the LCD or in the Capture One software.