Philips 55PFL5907 - Connection Test

English
42
IPconguration
Infollowingcases,selectIP congurationtoseteachsettingas
necessary.
– WhenconnectiontestfailedwiththesettingofConnection test.
– WheninstructedbyyourInternetserviceprovidertomakespecific
settingsinaccordancewithyournetworkenvironment.
3 Use▲▼toselectIP conguration,thenpressOK.
4 Use▲▼toselectasetting,thenpressOK.
Networkselection IPsettingmode Manual
Wirelessnetworksetting IPaddress 192.168.11.3
IPconfiguration Subnetmask 255.255.255.0
Proxyconfiguration
Defaultgateway 192.168.11.1
PrimaryDNS 192.168.11.1
SecondaryDNS
0.0.0.0
MACaddress 00:12:0E:10:09:15
IP setting mode
Auto
SetstheIPsettingautomatically.
Manual
SetstheIPsettingmanually.
IP address *
1,3
Asetofnumberswhichareassignedto
devicesparticipatinginacomputernetwork.
Subnet mask *
1,3
Amaskwhichisusedtodeterminewhat
subnetanIPaddressbelongsto.
Default gateway*
1,3
IPaddressofthenetworkdevice(suchas
router)whichprovidesInternetaccess.
DNS
setting mode
Auto
SetstheDNSsettingautomatically.
Manual
SetstheDNSsettingmanually.
Primary DNS*
2,3
AserverwhichhandlesthenameandIP
addressovertheInternet.
Secondary DNS*
2,3
AserverwhichhandlesthenameandIP
addressovertheInternet.
MAC address
Anaddresswhichrecognizesthedevices
connectingtothenetwork.Itisalsocalled
HardwareAddress.
*1

ItemscanbeselectedonlywhenIP setting modeissettoManual.
*2

ItemscanbeselectedonlywhenDNS setting modeissettoManual.
*3

Use▲▼orthe NUMBER buttonstoinputnumbers.Whenyouuse
▲▼toinputnumbers,thenpressOKorinputthetripledigitsbyusing
the NUMBER buttons,thecursormovestothenextentryeld.Whenyou
use▲▼toinputnumbers,thenpressOKorinputthetripledigitsbyusing
the NUMBER buttonsattherightmostentryeld,numberswillbestored
andgobacktothepreviousmenu.
Note
• Therangeofinputnumbersisbetween0and255.
• Ifyouenteranumberlargerthan255,thenumberwillautomaticallybe255.
• ThemanuallyenterednumberwillbesavedevenifyouchangethesettingtoAuto.
• Ifyouwanttoenter1or2digitnumberinonecell,pressOKtomoveontothenext
cell.
• IftheenteredIPaddressorthedefaultgatewayorprimaryDNSnumberissameas
thedefaultsetting,IPaddresssettingwillbesettoAuto.(Themanuallyenterednumber
willbesaved).
• WhenIPaddresssettingissettoManual,thesettingofDNSsettingwillautomatically
beManualandwhenIPaddresssettingissettoAuto,youcanseteitherAutoor
ManualforDNSsetting.
Proxyconguration
3 Use▲▼toselectProxy conguration,thenpressOK.
4 Use▲▼toselectasetting,thenpressOK.
Networkselection
Proxysetting Donotuse
Wirelessnetworksetting
IPconfiguration
Proxyconfiguration
• Do not useisselectedfordefaultsettings.
• Ifyouneedtochangetheproxysettingasinstructedbyyour
Internetserviceprovidertosetthedesignatedproxyaddress
andport,selectUse.
Proxy setting
Do not use
Notusetheproxyserver.
Use
Usestheproxyserver.
Proxy address *
Selectsthenumberorwordbyusing
▲▼◄►,thenpressOK.
Proxy port *
Use▲▼orthe NUMBER buttonstoinput
numbers.
*

ItemscanbeselectedonlywhenProxy settingissettoUse.
Note
• Therangeofinputnumbersfortheportnumberisbetween0and65535.
 (Ifyouenteranumberlargerthan65535,itwillberegardedas65535.)
• Forproxyport,theselectedportsmaybeblockedandnotbeabletousedepending
onyournetworkenvironment.
• Iftheproxyaddressisenteredwithblankonly,proxyserversettingwillbesetto
Do not use.
Connection test
PerformthefollowingstepstotestyourInternetconnectionafteryou
haveconnectedanEthernetcableorenterednetworksettingssuchas
IPaddress,DNSsettings,etc.manually.
2 Use▲▼toselectConnection test,thenpressOK.
3 PressOKtoselectStart now.
• Connectiontestwillstartautomaticallyandthetestresultwill
appearrightaftertheconnectiontestnishes.
Testing…
Thetestisinprogress.
Pass
Connectiontestissuccessfullycompleted.
Fail
Connectiontestfailed.Checktheconnectionsettings.
4 PressOKtogotothelistofnetworkstatusconrmationscreen.
Note
• Iftheconnectiontestpasses,youarereadytouseNetTVornetworkupgradefunction
usingtheInternetwithoutmakinganyadditionalsettings.
• Iftheconnectiontestfails,checkiftheEthernetcableisconnectedtothisTVproperly
orifyouhaveenteredalltherequireddetailsforthewirelessLANconnectionproperly.
 Continued on next page.