M4735A Service Manual 5-15
Mechanical Assemblies
5
Individual Mechanical Parts
These mechanical parts are available separately.
Items marked with an asterisk (
* ) contain Key Components which require
tracking. See Table 5-18 on page 5-25.
Table 5-10 Individual Mechanical Parts
Description Part Number Notes
Cable Tie Wrap 1400-0577 Used to secure Lithium Battery to
Control PCA.
T10 (M3X0.5) screw 0515-0375 Long screw used to connect the
paddle wires from the Keyscan PCA
to the through-case connection to
the Paddle Clip.
T10 nut 0535-003 Used to secure the T10 screw
(0515-0375).
T10 (M3X6) screws 0515-0430 Used for battery cover, interior
assemblies, PCAs. Also used out-
side the case to connect the Paddle
Clip to the through-case connection
to the Keyscan PCA.
T10 (M3X20) screws 0515-1410 Long screws used for securing
Parameter PCA to top case. If
SpO
2
installed, secures SpO
2
PCA
to Parameter PCA.
T15 (M4) flat head screws 0515-2044 Used only for securing paddle
holder to case.
T15 (M4X10) screws 0515-0380 Used for case exterior.
Rubber Feet M4735-69562 Includes 4 feet.
Energy Select Knob M4735-69565 Includes metal retainer clip inside
shaft hole.
Metal Clip M4735-40019 Metal contact clip for paddles. Also
supplied with Paddle Holder
Assembly (M4735-69561).
To Next Page
Loading...
