Phoenix Contact ILC 131 STARTER KIT - Reading in INTERBUS; Figure 5-14 View, Connected INTERBUS Command

Step-by-step development of an example project
105724_en_01 PHOENIX CONTACT 41
5.1.5 Reading in INTERBUS
An INTERBUS system that is connected to an Inline controller can be read in once the
communication path to the Inline controller has been established.
How to proceed • Select the “Connected INTERBUS” command from the “View” menu to read in the
connected INTERBUS.
Figure 5-14 “View, Connected INTERBUS” command
In the example structure (see Figure 2-1 on page 11) one INTERBUS module is
connected to the ILC 131 ETH.