Physio Control LIFEPAK 9 - Tools and Materials for Cleaning and Repair; Cleaning Procedures

Service and Maintenance 4
Tools and Table 4-2 lists recommended tools, materials, and chemicals required for
Materials for cleaning and repair activities. Although specific items are recommended,
Cleaning and tools and materials with specifications equivalent to those listed may be used.
Repair .
Table 4-2 Tools and Materials for Cleaning and Repair
Product Description
Static-protected work area Grounded conductive surface and wrist strap
Electronic Supply Dealers
X-32B and Xersin® solder Low flux, no cleaning necessary
Multicore
Westbury, NY 11590
5-Minute® Epoxy Adhesive
Devcon
Danvers, MA 01923
Tak Pak® Adhesive and 710 accelerator
Loctite
Newington, CT 06111
Crocus cloth
Isopropyl alcohol
Acid brush
Cotton swabs
Vacuum cleaner
Soft-bristle
brush
Nonmetallic
Cloth Clean and lint-free
Compressed
air
Clean
and
dry
(60psi,
max.)
Cleaning
Clean
the
instrument
after
maintenance,
disassembly,
or
any
repair
Procedures
procedure.
External
Cleaning
Clean
the
instrument
case,
cables,
and
screen
with
mild
soap
and
water.
Use
only
a
damp
sponge
or
towel
to
clean.
Warning
SHOCK
OR
FIRE
HAZARD.
Do
not
immerse
any
portion
of
the
instrument
in
water.
Fluid
spills
and
splashes
may
damage
the
instrument’s
electrical
components.
Caution
Possible
Instrument
Damage.
Do
not
autoclave
the
instrument.
4-13
ya çiğ Resi