Physio Control LIFEPAK 9 - Page 112

LIFEPAK 9 defibrillator/monitor
Interior Cleaning
Follow disassembly procedures (beginning on page 4-6) to access the
interior.
Warning PERSONAL SAFETY HAZARD. Ventilate work area when using
solvents. Observe manufacturer warnings regarding personnel safety and
emergency first aid. Keep first aid equipment available when using
chemicals.
Warning
CHEMICAL FIRE HAZARD. Observe shop safety and fire
precautions. Store solvents and solvent-soaked rags in approved
containers. Refer to manufacturers instructions on containers for
recommended firefighting procedures. Keep firefighting equipment
available.
Caution
Possible Component Damage. This instrument contains static sensitive
devices (SSDs). Use special handling procedures on page 4-5.
Caution
Possible
Component
Damage.
Do
not
use
solvents
to
clean
transformers
or
inductors.
1.
Brush
surfaces
and
parts
with
a
nonmetallic
soft-bristle
brush.
Remove
loosened
dirt
and
dust
using
dry
low
pressure
compressed
air
(60psi)
or
a
vacuum
cleaner.
2.
Wipe
metal
surfaces
with
a
soft,
nonabrasive
cloth
dampened
with
isopropyl
alcohol.
Caution
Prevent
Nameplate
Damage.
Do
not
use
abrasive
cleaners
or
solvents
to
wipe
nameplates
and
labels—the
nameplate
information
may
disappear.
3;
Wipe
surfaces
of
nameplates
and
labels
with
a
clean,
dry
cloth
Caution
Po:
i
р
р
Ssible
Component
Damage.
Do
not
use
solvents
to
clean
plastic
parts
4-14
“Rays
Posa
Wed