Physio Control LIFEPAK 9 - Content Overview

LIFEPAK 9 defibrillator/monitor
xviii
Assembly Name PartNumber Rev
Defibrillation Adapter 803747 B2
Test Load High Voltage Wire Harness 803774-03 Al
Test Load High Volage Wire Harness 803774-04 Al
Pushbutton Switch Wire Harness 803774-05 Al
High Voltage Connector Cable Assembly 803756-09 D4
Content Overview This manual contains the following information:
Section 1
Section 2
Section 3
Section 4
Section 5
Section 6
Description: This section details how the instrument works. Input signals,
power supplies, PCB functions, and instrument outputs are described. Each
PCB circuit description is accompanied by a block diagram to illustrate the
major circuits. Circuit names in these block diagrams also appear in the
appropriate schematics in Section 5.
Operation: This section familiarizes the user with basic equipment function.
It identifies Controls, Indicators, and Connectors, and screen menu options.
This section is not intended to instruct the operator in the clinical use of the
instrument; such detailed instructions are provided in the separate Operating
Instructions manual.
Testing/Troubleshooting: This section contains the Performance Inspection
Procedure (PIP)—sequential steps to follow when performing an operational
closed-case check of the equipment. A PIP checklist is provided which can
be duplicated and used during testing. The Test and Calibration Procedure
(TCP) in this section describes calibration and more extensive instrument
testing; it also includes a checklist. The Troubleshooting Aids includes
additional information to support troubleshooting.
Service and Maintenance: This section provides Disassembly/Assembly
Procedures for removing all major subassemblies. The procedures are
referenced to numbered parts in the Final Assembly drawing in Section 5.
This section includes instructions for inspecting, cleaning, maintaining, and
repairing the instrument.
Parts Lists/Schematics: This section contains a list of Supplies and
Accessories, Illustrated Parts Lists, PCB Component Layouts, and Schematic
Diagrams for all repairable assemblies.
Component Reference Diagrams: An aid to troubleshooting, this section
consists of Component Reference Diagrams for selected Integrated Circuits
(ICs). The ICs in Section 6 are identified in the schematics in Section 5 with
a large asterisk >.
All Rights Reserved © August 1993 Physio-Control