PI MS249E - Page 227

8 GCS Commands
C-863.12 Mercury Controller MS249E Version: 1.2.1 221
data bits with 1.5 stop bits
-31
COM_ERROR_RS_SETTINGS
RS-232: Error configuring the
COM port
-32
COM_INTERNAL_RESOURCES_ERROR
Error dealing with internal
system resources (events,
threads, ...)
-33
COM_DLL_FUNC_ERROR
A DLL or one of the required
functions could not be loaded
-34
COM_FTDIUSB_INVALID_HANDLE
FTDIUSB: invalid handle
-35
COM_FTDIUSB_DEVICE_NOT_FOUND
FTDIUSB: device not found
-36
COM_FTDIUSB_DEVICE_NOT_OPENED
FTDIUSB: device not opened
-37
COM_FTDIUSB_IO_ERROR
FTDIUSB: IO error
-38
COM_FTDIUSB_INSUFFICIENT_RESOURCES
FTDIUSB: insufficient
resources
-39
COM_FTDIUSB_INVALID_PARAMETER
FTDIUSB: invalid parameter
-40
COM_FTDIUSB_INVALID_BAUD_RATE
FTDIUSB: invalid baud rate
-41
COM_FTDIUSB_DEVICE_NOT_OPENED_FO
R_ERASE
FTDIUSB: device not opened
for erase
-42
COM_FTDIUSB_DEVICE_NOT_OPENED_FO
R_WRITE
FTDIUSB: device not opened
for write
-43
COM_FTDIUSB_FAILED_TO_WRITE_DEVIC
E
FTDIUSB: failed to write
device
-44
COM_FTDIUSB_EEPROM_READ_FAILED
FTDIUSB: EEPROM read failed
-45
COM_FTDIUSB_EEPROM_WRITE_FAILED
FTDIUSB: EEPROM write
failed
-46
COM_FTDIUSB_EEPROM_ERASE_FAILED
FTDIUSB: EEPROM erase
failed
-47
COM_FTDIUSB_EEPROM_NOT_PRESENT
FTDIUSB: EEPROM not
present
-48
COM_FTDIUSB_EEPROM_NOT_PROGRAM
MED
FTDIUSB: EEPROM not
programmed
-49
COM_FTDIUSB_INVALID_ARGS
FTDIUSB: invalid arguments
-50
COM_FTDIUSB_NOT_SUPPORTED
FTDIUSB: not supported
-51
COM_FTDIUSB_OTHER_ERROR
FTDIUSB: other error
-52
COM_PORT_ALREADY_OPEN
Error while opening the COM
port: was already open
-53
COM_PORT_CHECKSUM_ERROR
Checksum error in received
data from COM port
-54
COM_SOCKET_NOT_READY
Socket not ready, you should
call the function again
-55
COM_SOCKET_PORT_IN_USE
Port is used by another socket
-56
COM_SOCKET_NOT_CONNECTED
Socket not connected (or not