PI MS249E - Page 229

8 GCS Commands
C-863.12 Mercury Controller MS249E Version: 1.2.1 223
-1012
PI_MACRO_FILE_ERROR
Could not open file to write or
read macro
-1013
PI_NO_MACRO_OR_EMPTY
No macro with specified
name on controller, or macro
is empty
-1014
PI_MACRO_EDITOR_ERROR
Internal error in macro editor
-1015
PI_INVALID_ARGUMENT
One or more arguments
specified for function invalid
(empty string, index out of
range, ...)
-1016
PI_AXIS_ALREADY_EXISTS
Axis identifier is already in use
by a connected stage
-1017
PI_INVALID_AXIS_IDENTIFIER
Invalid axis identifier
-1018
PI_COM_ARRAY_ERROR
Could not access array data in
COM server
-1019
PI_COM_ARRAY_RANGE_ERROR
Range of array does not fit
the number of parameters
-1020
PI_INVALID_SPA_CMD_ID
Invalid parameter ID specified
for SPA or SPA?
-1021
PI_NR_AVG_OUT_OF_RANGE
Number for AVG out of range-
-must be >0
-1022
PI_WAV_SAMPLES_OUT_OF_RANGE
Incorrect number of samples
specified for WAV
-1023
PI_WAV_FAILED
Generation of wave failed
-1024
PI_MOTION_ERROR
Motion error: position error
too large, servo is switched
off automatically
-1025
PI_RUNNING_MACRO
Controller is (already) running
a macro
-1026
PI_PZT_CONFIG_FAILED
Configuration of PZT stage or
amplifier failed
-1027
PI_PZT_CONFIG_INVALID_PARAMS
Current settings are not valid
for desired configuration
-1028
PI_UNKNOWN_CHANNEL_IDENTIFIER
Unknown channel identifier
-1029
PI_WAVE_PARAM_FILE_ERROR
Error while reading/writing
wave generator parameter
file
-1030
PI_UNKNOWN_WAVE_SET
Could not find description of
wave form. Maybe WG.INI is
missing?
-1031
PI_WAVE_EDITOR_FUNC_NOT_LOADED
The WGWaveEditor DLL
function was not found at
startup