PI MS249E - Page 230

8 GCS Commands
224 Version: 1.2.1 MS249E C-863.12 Mercury Controller
-1032
PI_USER_CANCELLED
The user cancelled a dialog
-1033
PI_C844_ERROR
Error from C-844 Controller
-1034
PI_DLL_NOT_LOADED
DLL necessary to call function
not loaded, or function not
found in DLL
-1035
PI_PARAMETER_FILE_PROTECTED
The open parameter file is
protected and cannot be
edited
-1036
PI_NO_PARAMETER_FILE_OPENED
There is no parameter file
open
-1037
PI_STAGE_DOES_NOT_EXIST
Selected stage does not exist
-1038
PI_PARAMETER_FILE_ALREADY_OPENED
There is already a parameter
file open. Close it before
opening a new file
-1039
PI_PARAMETER_FILE_OPEN_ERROR
Could not open parameter file
-1040
PI_INVALID_CONTROLLER_VERSION
The version of the connected
controller is invalid
-1041
PI_PARAM_SET_ERROR
Parameter could not be set
with SPA--parameter not
defined for this controller!
-1042
PI_NUMBER_OF_POSSIBLE_WAVES_EXCEE
DED
The maximum number of
wave definitions has been
exceeded
-1043
PI_NUMBER_OF_POSSIBLE_GENERATORS_
EXCEEDED
The maximum number of
wave generators has been
exceeded
-1044
PI_NO_WAVE_FOR_AXIS_DEFINED
No wave defined for specified
axis
-1045
PI_CANT_STOP_OR_START_WAV
Wave output to axis already
stopped/started
-1046
PI_REFERENCE_ERROR
Not all axes could be
referenced
-1047
PI_REQUIRED_WAVE_NOT_FOUND
Could not find parameter set
required by frequency
relation
-1048
PI_INVALID_SPP_CMD_ID
Command ID specified for SPP
or SPP? is not valid
-1049
PI_STAGE_NAME_ISNT_UNIQUE
A stage name specified for
CST is not unique
-1050
PI_FILE_TRANSFER_BEGIN_MISSING
A uuencoded file transferred
did not start with "begin"
followed by the proper
filename
-1051
PI_FILE_TRANSFER_ERROR_TEMP_FILE
Could not create/read file on