PIAGGIO Beverly Tourer 300 i.e. - Page 52

higher than 9/10 or lower than 7/10 f the height
from the ground to the centre of vehicle headlamp;
- Otherwise, adjust the headlight.
N.B.
THE ABOVE PROCEDURE COMPLIES WITH THE EURO-
PEAN STANDARDS REGARDING MAXIMUM AND MINI-
MUM HEIGHT OF LIGHT BEAMS. REFER TO THE STATU-
TORY REGULATIONS IN FORCE IN EVERY COUNTRY
WHERE THE VEHICLE IS USED.
To adjust light beams:
- Undo the five screws indicated and remove the
windshield.
- Operate on the screw indicated in order to aim
the light in the desired way.
Maintenance Beverly Tourer 300 i.e.
MAIN - 52