5. HV coil: remove the right side fairing in order to
reach it.
Characteristic
HV coil resistance primary value:
~ 0.9 Ω
HV coil secondary resistance value:
~ 3.4 kΩ
6. Voltage regulator: remove the right side fairing
to reach it.
Electric characteristic
Control voltage
14÷15 V to 1500÷12000 rpm
7. Oil pressure sensor: placed at the bottom at the
back of the vehicle RHS.
8. Diagnostics socket connector: remove the cover
on the vehicle right side to reach it.
Beverly Tourer 300 i.e. Electrical system
ELE SYS - 61
To Next Page