- The MAX level reference indicates ~ 1000 cm³ in the engine.
- When the oil level is below the MAX mark, top-up with oil but without exceeding the MAX level.
Recommended products
AGIP CITY HI TEC 4T Engine oil
SAE 5W-40 Synthetic oil that exceed the requirements of API SL, ACEA A3, JASO MA specifications
Level check
SAS filters inspection and cleaning
Undo the 3 fixing screws "A", remove the secon-
dary air filter cover and then take out the filtering
element "B".
- Wash with water and neutral soap.
-Dry with a clean cloth and short blasts of com-
pressed air.
Remove the flywheel cover by operating on its
clamps and remove the primary filtering element.
- Wash with water and neutral soap.
-Dry with a clean cloth and short blasts of com-
pressed air.
Check that the filter casing is clean paying special
attention to "A" and "B" passages
CAUTION
NEVER RUN THE ENGINE WITHOUT THE SECONDARY
AIR FILTER
CAUTION
Maintenance X9 Evolution 125
MAIN - 46
To Next Page
Loading...
