PIAGGIO X9 Evolution 125 2008 - Steering and Suspension Issues

Controls
STEERING CONTROLS AND SUSPENSIONS
Possible Cause Operation
Torque not conforming Check the tightening of the top and bottom ring nuts. If irregu-
larities continue in turning the steering even after making the
above adjustments, check the seats in which the ball bearings
rotate: if they are recessed or if the balls are squashed, replace
them.
Steering hardening Check the tightening of the top and bottom ring nuts. If irregu-
larities continue in turning the steering even after making the
above adjustments, check the seats in which the ball bearings
rotate: if they are recessed or if the balls are squashed, replace
them.
Malfunctions in the suspension system If the front suspension is noisy, check: the efficiency of the front
shock absorber; the condition of the ball bearings and relevant
lock-nuts, the limit switch rubber buffers; and the movement
bushings. In conclusion, check the tightening torque of the
wheel hub, the brake calliper, the shock absorber disc in the
attachment to the hub and the steering tube.
Seal fault or breakage Replace the shock absorber Check the condition of wear of the
steering covers and the adjustments.
X9 Evolution 125 Troubleshooting
TROUBL - 55