LUBRICATION AND MAINTENANCE INTERVALS
7-4 / Scheduled Inspections
© 2020 Pierce Manufacturing Inc. All Rights Reserved.
7-1.4 Monthly Inspections
Monthly Preventative Maintenance, Checks, and Services
System/Component Action
Standard
Interval
Alternate
As Indicated
Air Drier Check for moisture in air drier and air system. Monthly
25,000 miles /
40,000 km or
900 hours
Axle, Rear Check oil level in carrier. Monthly
10,000
Battery Posts Clean and grease after cleaning. Monthly
Cab Tilt Pivot Pins Lubricate with Lithium NLGI Grade EP2 grease.Monthly
3,000
Cab Tilt Remote
Control Receptacle
Lubricate with NYK corrosion preventative compound
(Trucklite 97944 or equivalent).
Monthly
3,000
Driveshaft Slip Joints Lubricate with Lithium NLGI grade EP2 grease. Monthly
3,000
Driveshaft U-Joints Lubricate with Lithium NLGI grade EP2 grease.Monthly
3,000
Radiator and Charge
Air Cooler Cores
Clean debris to ensure unimpeded air flow through cores. Monthly
3,000
Spring Pins Lubricate with Lithium NLGI grade EP2 grease. Monthly
3,000
Steering Intermediate
Links
Lubricate with Lithium NLGI grade EP2 grease. Monthly
3,000
Wheel Bearings, Oil
(Front Axle)
Check fluid level and add as required. Monthly
3,000
Wheel Nuts Check torque and tighten as required. Monthly
3,000
Body Door Hinges Inspect and Adjust. Spray with silicone lubricant. Monthly
Body Door Latches
and Positive Door
Holders
Lubricate with Lubriplate105 grease or equivalent. Monthly
Body Door Strikers Inspect and adjust. Monthly
Comments or Additional Items
To Next Page
Loading...
