Function description
Operating Manual PITreader, PITreader Firmware V1.5.x
1004806-EN-08
| 23
5.5.1 System parameters
There are parameters with pre-defined functions. The ID and data type are specified for
these parameters. Users may assign the name.
ID Data type Meaning
1 PERMISSION Permission
Permissions for device groups 32 ... 9999
Note: In the user data, permissions can also be defined for
groups 0 to 31, but these are ignored. The permissions
entered in the web application under Transponder -> Per-
missions always apply for device groups 0 to 31.
2 DATETIME Start date
Details of when the permission for a device group will start
to be valid. This value can be defined for groups 0 ... 9999.
Note: The start date is only evaluated if the Evaluate
validity date option is activated for the PITreader.
3 DATETIME End date
Details of when the permission for a device group will
cease to be valid. This value can be defined for groups
0 ... 9999.
Note: The end date is only evaluated if the Evaluate valid-
ity date option is activated for the PITreader.
To Next Page
Loading...
