Pilz PITreader - 2 Overview; 2.1 Device features

Overview
Operating Manual PITreader, PITreader Firmware V1.5.x
1004806-EN-08
| 8
2 Overview
The product can be used with the following external components/systems:
} Transponder key (PITreader key) for authentication
} Web application on a PC for configuration
} Operator terminal (HMI) for authentication
} Safety controller (FS-PLC) for safe operating mode selection or authentication
} Safe evaluation unit (e.g. PIT m4SEU, order no. 402 250) for safe operating mode selec-
tion (only on PITreader base unit)
2.1 Device features
} System for authentication and authorisation on control systems
} Authentication is via transponder key
} Configurable via a web application
} Ethernet interface for Modbus/TCP
} LED to display device status
Only on PITreader base unit:
} Interface for connecting a safe evaluation unit (SEU) for operating mode selection
} For mounting cutouts D22 (diameter 22.3mm +0.4mm/-0.0mm) in accordance with
EN60947-5-1 with anti-rotation device
Only PITreader S base unit type devices and versions of the PITgb with PITreader (e.g.
PIT gb RLLE y up ETH, PIT gb RLLE y down ETH):
} Integrated OPC Server UA