22
Basic adjustment settings
Moving the picture on the screen
You can move the picture around on the screen.
///
Press / / / to move an image on the screen to the
desired position.
A
• While pressing
/ / / , an on-screen image, “Adjusting
Position” displays to the desired position.
• This setting cannot be stored. Once the System shuts
down or enters standby mode, the setting is erased. To
move the picture around the screen again, you must
perform the above procedure again.
• An on-screen image from a PC source cannot be moved
around.
• Initialise the image position by pressing ENTER.
PDP-503HDE/(E)-c 8/31/02, 5:47 PM22
To Next Page
Loading...
Need help?
General