Pioneer PDP-433HDE User Manual

6
Preparation
Installing the Plasma Display
Locating
• Avoid the direct sunlight. Keep enough ventilation.
• The length of the system cable used to connect the
Plasma Display and the Media Receiver is about 3
m.
• Because the Plasma Display is heavy, be sure to
move it by more than two persons.
L
• Do not place anything on the Media Receiver. Otherwise,
the Media Receiver does not receive enough ventilation,
and does not operate properly.
A
• When installing, keep enough space around the upper
part and the back part, in order that ventilation around
back part is secured.
Using the optional PIONEER stand
• For details concerning installation, please refer to
the instruction manual provided with the stand.
Using the optional PIONEER speakers
• For details concerning installation, please refer to
the instruction manual provided with the speaker.
L
Operating Environment
Operating environment temperature and humidity: e0°C–
e40°C (e32F–e104F); less than 20–80%RH (cooling vents
not blocked)
Avoid installing in the following locations:
• Under direct exposure to sunlight,
• Under strong artificial light,
• In high humidity,
• Poorly ventilated.
Over
10 cm
Over
50 cm
PDP-503HDE/(E)-a 8/31/02, 5:08 PM6

Pioneer PDP-433HDE Specifications

General

Brand	Pioneer
Model	PDP-433HDE
Category	Monitor
Language	English