Pioneer PDP-433HDE User Manual

52
Option
MENU
WSS [On]
Off
On
Option
MENU
4:3 Mode [4:3]
4:3
WIDE
ENTER
MENU
/
Description
Normal range keeping 4:3 or 16:9 aspect
ratio
Wide image without sidebars
Selected item
4:3
WIDE
Useful adjustment settings
Wide screen signalling (WSS) (AV
mode only)
WSS allows a television to switch automatically among
the different screen formats.
1 Press MENU.
2 Press / to select “Option”, and then press
ENTER.
3 Press / to select “WSS”, and then press ENTER.
4 Press / to select “Off” or “On”, and then press
ENTER.
5 Press MENU to exit the menu.
A
• Return to the previous menu by pressing n.
• Try to set WIDE mode if an image does not switch to the
correct screen format. When the broadcast signal contains
no WSS information, the function will not work even if
enabled. See page 51.
Picture aspect ratio (AV mode only)
Allows you to select the aspect ratio of a video signal
for standard 4:3 or full screen images.
1 Press MENU.
2 Press / to select “Option”, and then press
ENTER.
3 Press / to select “4:3 Mode”, and then press
ENTER.
4 Press / to select “4:3” or “WIDE”, and then press
ENTER.
5 Press MENU to exit the menu.
A
• Return to the previous menu by pressing n.
• Try to set WIDE mode if an image does not switch to the
correct screen format. When the broadcast signal contains
no WSS information, the function will not work even if
enabled. See page 51.
WSS signal 4:3 screen
4:3 mode “4:3”
4:3 mode “WIDE”
PDP-503HDE/(E)-e 8/31/02, 5:41 PM52

Pioneer PDP-433HDE Specifications

General

Brand	Pioneer
Model	PDP-433HDE
Category	Monitor
Language	English