Pioneer PDP-5010FD

PDP-5010FD
102
1234
1 234
C
D
F
A
B
E
<DOWN> : Shifting to the next item
<UP> : Shifting to the previous item
<RIGHT> : Adding by one to the adjustment/
setting value
<LEFT> : Subtracting by one from the
adjustment/setting value
<VOL+> : Adding by 10 to the adjustment/
setting value
<VOL-> : Subtracting by 10 from the
adjustment/setting value
<SET> : Determining the adjustment/setting
value and shifting to the upper layer
<DOWN> : Shifting to PANEL FUNCTION (+)
<UP> : Shifting to PANEL-1 ADJ (+)
<SET> : Shifting to the next nested layer
g Key operation
g Key operation
• White balance can be adjusted by adjusting R, G, and B gain. Pressing the ENTER/SET key shifts the screen to the
next nested layer below for item selection.
Drive sequence and adjustment table
Sequence Name
Adjustment Value
Table
Video50
TBL2
6.2.2.6 PANEL-2 ADJ (+)
A.PNEL
L/1
[
BT60VS
]
FACT
AJPNEL–2AD )(+
A.PNEL
L/1
[
BT60VS
]
FACT
–>RHGIH<=
AJPNEL–2AD
5:2 4
V–D1 1 5060 –NTV TA–B
V–D1 1 5060 –NTV TA–B
1
5
10
15
16
1 5 10 15 20 25 30 32
1
5
10
15
16
1 5 10 15 20 25 30 32
1
2
3
4
5
6
7
8
9
A
B
C
D
E
1
2
3
4
5
6
7
8
9
A
B
C
D
E
Video60
TBL1
Video72
TBL1
Video75
TBL3
PC60
TBL4
The ABL/WB adjustment values are grouped into up to four tables, depending on the drive sequences. The adjustment value for the
actually driven table is displayed. The number of the adjustment table and the drive sequence currently selected are displayed on the
right side of the third line as the On-Screen display.