Pioneer PDP-5010FD

PDP-5010FD
54
1234
1 234
C
D
F
A
B
E
5.2.6 VIDEO SYSTEM
Flowchart of Failure Analysis for The Video System
Is the selected input signal a
terrestrial analog TV?
Are the data displayed on the
"HDMI SIGNAL INFO" page of
the Factory menu correct?
The source equipment previously
used is in failure.
No problem with the MAIN Assy.
Is the sync signal output from
IC5201?
Does the result of SIG mode
detection on the Factory menu
coincide with the input signal data?
Ye s
No
No
No
OK
After changing the source
equipment, check the "HDMI
SIGNAL INFO" data again.
NG
Replace the MAIN Assy.
No
Replace the MAIN Assy.
The input signal is not displayed.
=> TV
Is the selected input signal a
composite signal?
Ye s
No
=> COMP / S
=> PC
Is the selected input signal a
component signal?
Ye s
=> COMP / PC1
Is the selected input signal a
S-video signal?
Is the selected input signal an
PC signal?
Ye s
No
Is the selected input signal an
HDMI signal?
Ye s
Ye s
=> DTV
Is the selected input signal a
digital TV signal?
Ye s
=> USB_E / USB_R
Is the selected input signal a
USB signal?
No problem with the MAIN Assy
Ye s
No
No
Ye s
Ye s
Ye s
Is the sync signal input to IC8001?
No
Replace the MAIN Assy.
Replace the MAIN Assy.
Ye s
Replace the MAIN Assy.
No
No
No
=> COMP / S
Failure analysis for the
MAIN Assy => MA3