Pioneer PDP-5010FD

PDP-5010FD
85
5678
56
7
8
C
D
F
A
B
E
Large Item
Variable / Adjustment Range Remarks
Middle Item
Small Item
6.2.2 PANEL FACTORY (+)
6.2.2.8 ETC. (+) BACKUP DATA <=> NO OPRT <=> TRANSFER or ERR Equivalent to BCP
DIGITAL EEPROM <=> NO OPRT <=> DELETE/REPAIR Equivalent to FAJ/UAJ
PD INFO. <=> NO OPRT <=> CLEAR Equivalent to CPD
SD INFO. <=> NO OPRT <=> CLEAR Equivalent to CSD
HR-MTR INFO. <=> NO OPRT <=> CLEAR Equivalent to CHM
PM/B1-B5 <=> NO OPRT <=> CLEAR Equivalent to CPM
P COUNT INFO. <=> NO OPRT <=> CLEAR Equivalent to CPC
MAX TEMP. <=> NO OPRT <=> CLEAR Equivalent to CMT
6.2.2.9 RASTER MASK SETUP (+) MASK OFF Equivalent to MKS+S00
RST MASK 01 <=> <=> 48V <=> 50V <=> 60V <=> 72V <=>
75V <=> 60P <=>
<=> 48V <=> 50V <=> 60V <=> 72V <=>
75V <=> 60P <=>
<=> 48V <=> 50V <=> 60V <=> 72V <=>
75V <=> 60P <=>
Equivalent to MKS+S51
• • • • • •
RST MASK 25 <=> Equivalent to MKS+S75
6.2.2.10 PATTERN MASK SETUP (+) MASK OFF Equivalent to MKS+S00
PTN MASK 01 <=> Equivalent to MKS+S01
• • • • • •
PTN MASK 49 <=> Equivalent to MKS+S49
6.2.2.11 COMBI MASK SETUP (+) MASK OFF Equivalent to MKC+S00
CMB MASK 01 <=> Equivalent to MKC+S01
• • • • • •
CMB MASK 17 <=> Equivalent to MKC+S17
Exclusively used for
production line
6.2.4 INITIALIZE
for the technical analysis
6.2.3 OPTION
6.2.3.1 EDID WRITE MODE <=>
6.2.3.2 ANTENNA MODE <=>
6.2.3.3 AFT <=>
for the technical analysis
6.2.3.4 SYNC DET (+)
6.2.3.5 CC (+)
6.2.4.1 SIDE MASK LEVEL (+)
6.2.4.2 FINAL SETUP DATA RESET <=>
SIDE MASK LEVEL <=>
NO <=> YES
6.2.4.3 HMG/HG SERVICE MODE MODE SHIFT <=> NO <=> YES
DISABLE <=> ENABLE
CABLE <=> AIR
DISABLE <=> ENABLE
DISABLE <=> ENABLE
6.2.4.4 Wide XGA AUTO <=>
Exclusively used for
technical analysis
(details omitted)