PDP-5071PU
131
5678
56
7
8
C
D
F
A
B
E
8.1.3 OPERATION OF SERVICE FACTORY MODE
Functions whose setting are set to OFF.
The settings for the following functions are set to OFF when Service Factory mode is entered
(Including when the “FAY” command is received) :
Two screen operation Input function set on the main side is selected.
MTB/MB is none. It becomes processing on the PANEL side.
FREEZE
Mask control
Detection of the TRAP switch The detection operation is stopped.
TRAP history To a possible turning on though the memory is maintained.
Setting of Parental Control
Display of TV guide
ORBITER Central value operation.
Note) Enter the factory after canceling ACI because the ACI operation setting OFF and not done.
User data
User data will be treated as follows :
• User data on picture- and audio-quality adjustments are not reflected, and factory-preset data are
output (user data will be retained in memory). When the unit enters Service Factory mode, the
current audio-quality adjustment data will be still be retained in memory.
• As to data on various settings, user data will be applied to the items that are associated with signal
format change (screenize switching, etc).
• Data on screen (i.e.,screen position; meaning clock dividers, and not including data on screen size)
Are reset to the default values (data stored in memory will be retained). Screen size will be retained.
Function
No.
1
2
3
4
5
6
8
When this is turned off, the block of the screen is released.
7
Remarks
To Next Page
Loading...
Need help?
General