PDP-5071PU
183
5678
56
7
8
C
D
F
A
B
E
10.2 POWER SUPPLY TRANSITION STATUS
AC-OFF (AC power
cord unplugged)
DTV Active
(M_SW: OFF)
DTV Active (M_SW: ON) Fully Active
Power LED OFF OFF Standby (red LED) Power ON (blue LED)
PDP OFF OFF OFF OFF OFF ON (PDP indication)
PSW1 OFF OFF OFF OFF OFF ON (VDEC & ASIC ON)
Power control OFF OFF (POF) OFF (POF) OFF (POF) OFF (POF) PON (DTV+AV_ON)
Main microcomputer OFF ON ON ON (main microcomputer ON)
IF microcomputer OFF ON ON ON (IF microcomputer ON)
DTV
(Power interrupted: COLD)
WARM
External recording: WARM
Recording: HOT HOT
Screen: ON,
no recording
(DTV: HOT)
DTV idling
Acquiring
TV-G data
(DTV)
Communicating
Standby
(DTV: ON,
M_SW: ON
Standby
(DTV: ON,
M_SW: OFF)
AC-OFF
(DTV: COLD)
Screen: ON,
External
recording
Screen: OFF,
External
recording
Recording Recording
M_SW: ON
M_SW: OFF
The AC power cord is plugged
in. Last power: OFF
• "Power ON/OFF notification" indicates power communication
from the TV to the DTV.
•A description in parentheses indicates an incident or status.
• Boxed numbers indicate the modes of Power OFF/ON
completion notification from the DTV to the TV.
• The red line indicates power-on sequence, the blue line
power-off sequence, and the black line recording transition.
• If a timer recording is programmed to be started within 2
minutes after another timer recording is finished, the numbers
change 05, 04, then 05, in that order.
• If several timer recordings are programmed consecutively,
the number remains 03, and only the locked channel numbers
change.
• While M_SW_DET is off, the transitions from 01 to 05, 01 to
03, and 02 to 05 are prohibited.
Remarks:
• The main microcomputer manages last power ON/OFF.
• Standby comprises Function Standby and Timer Standby.
03: Acquiring data
• Acquiring SI data
• Acquiring logo data
• Acquiring TV-GUIDE data
• Acquiring clock data (TOT)
The AC power cord is plugged in. Last power: ON
Power off control, "Common data DL, power-on control"
Power off control
(Remote control unit: ON)
(Remote control unit: ON)
(Remote control unit: ON)
Data acquired. Timer: ON
Timer programming completed. Power: OFF
Timer: ON
00
02
01
03 04
05
Data acquired. Timer: OFF
: Spontaneous internal transition
: Spontaneous internal transition
: Power interrupted
: Only the screen is off
: Reset start
: Screen power on
: Screen power on
To Next Page
Loading...
Need help?
General