2 • Printer Basics
2-2 SV61749 Rev. D
Printer Features Overview
This section provides a brief overview of the printer features. Refer to
Appendix A, Specifications, for detailed specifications for the printer,
including specific requirements for using each type of material.
Speed (pieces per hour)
Printer speed refers to the number of pieces of mail that can be
processed in an hour. The printer can process up to 30,000 #10
or DL envelopes per hour, depending on print quality setting and
material being used.
Print Quality Settings
Super Draft (SDft): horizontal print density is at 150 dpi
Draft (Dft): horizontal print density is at 200 dpi
Letter (Ltr): horizontal print density is at 300 dpi
Executive (Exec): horizontal print density is at 600 dpi
Light Mode "On", vertical print density is at 300 dpi
Light Mode "Off", vertical print density is at 600 dpi
Internal Fonts
14 (15 including Code 3 of 9 Barcode). See Specifications Chapter
for more detailed information.
Font Size
Font size refers to the size of each typeface. The printer uses from 4
to 144 point size for internal or downloaded fonts.
Media Size
The printer can print on the following range of material sizes.
To Next Page
Loading...
