Pitney Bowes da95f - Setup Menu

Printer Basics • 2
2-23SV61749 Rev. D
Setup Menu
SETUP MENU MENU OPTIONS
1. STOP ON FEED ERROR A. ON
B. OFF
2. FEEDER SETUP A. FEEDER TYPE
B. ACTIVATE POLARITY
C. PULSE TIME
3. CONVEYOR SETUP A. USE CONVEYOR
B. CONVEYOR TYPE
C. ( IF CONVEYOR TYPE IS OTHER ) ACTIVATE POLARITY
D. ( IF CONVEYOR TYPE IS OTHER ) PULSE TIME
5. COMMUNICATIONS A. TCP/IP
B. LINE TERMINATION
C. CLEAR MEMORY
6. LANGUAGE A. SYMBOL SET
B. INCH / MILLIMETER
C. MENU LANGUAGE
7. TRANSPORT SPEED A. 50 TO 100 % (INCREMENTS OF 5%)
8. FEED GAP A. FEED GAP TYPE
B. FEED GAP DISTANCE
9. INK CARTRIDGE VOLUME A. NORMAL CAPACITY
B. EXTENDED CAPACITY
10. PRE-PURGE Print Head
MAINTENANCE
A. PURGE AT START
B. PERIODIC PURGE
C. PURGE INTERVAL
D. NOZZLE KEEP ALIVE
11. BUNDLE BREAK A. ENABLE / DISABLE
B. BREAK CHARACTER
C. BREAK CHARACTER COUNT
D. CHARACTER ORIENTATION
E. BREAK LOCATION
F. PRINT BREAK CHARACTER
G. BREAK PAUSE TIME
12. TRAY BREAK A. ENABLE / DISABLE
B. BREAK CHARACTER
C. BREAK CHARACTER COUNT
D. CHARACTER ORIENTATION
E. BREAK LOCATION
F. PRINT BREAK CHARACTER
G. BREAK PAUSE TIME
13. LOW INK WARNING A. DISPLAY WARNING
B. WARNING THRESHOLD
C. STOP WHEN EMPTY
14. LOGGING SETTINGS A. ENABLE LOGGING
B. LOGGING LEVEL
15. HEX DUMP MODE A. ON / OFF
16. ROM REVISION A. ROM REVISION / MAIN COUNT