2 • Printer Basics
2-4 SV61749 Rev. D
Setting Up A Job
Setting up a print job means adjusting the printer to accommodate
the width, height, thickness and weight of your material.
There are two things that determine how reliably your printer feeds:
the setup adjustments and the quality of your material. A good
setup minimizes misfeeds and jams. And your printer will perform
at it's best when you run material that falls within our published
specifications. See Appendix A for complete material specifications.
IMPORTANT NOTE: Following all of the setup steps in this
chapter will help ensure quality print results.
To Next Page
Loading...
