4 • Troubleshooting
4-2 SV61749 Rev. D
Important Note About Error Codes
When any paper handling error begins to occur frequently, the
following are several maintenance actions for the operator to
perform. There is a high likelyhood that performing these procedures
will correct the error. If these procedures do not correct the problem
then refer to the trouble shooting chart on the following pages for
further actions.
•Adjust the ‘H’ blocks
•Clean the paper path and sensors
•Calibrate the sensors
•Check Sensor Operation
•Check the thickness adjustment on the print heads
•In the WF96 check the tension on the feeder exit nip
To Next Page
Loading...
