2 • Printer Basics
2-28 SV61749 Rev. D
Output Stacker
The stacker holds up to 5" (127mm) of material before it becomes
necessary to remove the stack from the bin.
NOTE: As the stacker becomes full, there is a potential for
stacking misfeed (pieces not neatly stacked one on top of the
other). This can cause envelopes to stack out of sequence.
Optional Power Stacker
An optional high capacity power stacker is available for your printer.
Contact Pitney Bowes for more information.
Optional Power Stacker
Output Stacker
To Next Page
Loading...
