30
Patching Utilities
Signal Splitter
The signal splitter is a simple one input, two output buffered multiple. This can be used
to route audio into multiple places, or duplicate a modulation signal to control multiple
destinations
Signal splitter Input Jacks :
[S.IN JACK] Input to the signal splitter.
Signal splitter Output Jacks :
2x [S.OUT JACK] Outputs of the signal splitter.
Signal Mixer / Splitter
The signal mixer and splitter is a two input, two output unity gain mixer paired with a
buffered multiple. This can be used to mix 1 audio or CV signals and/or route a signal to
multiple destinations
Signal splitter Input Jacks :
2x [IN JACK] Inputs to the signal mixer/splitter.
Signal splitter Output Jacks :
2x [OUT JACK] Outputs of the signal mixer/splitter.
3 Voltage Lab 2 Voice Modules
To Next Page
Loading...
