Pittsburgh Modular Voltage Lab 2 - Clear Tool

61
Clear Tool
Clear Step Length
Hold the [EDIT BUTTON] and the [RESET BUTTON] and press the [SEQUENCER BUTTON] to set the current active Sequence(s)
Length to 16.
Clear Step Jumps
Hold the [EDIT BUTTON] and the [RESET BUTTON] and press the [RUN/STOP BUTTON] to clear all Step Jumps for the current
active sequence(s).
Clear Step Rolls
Hold the [EDIT BUTTON] and the [RESET BUTTON] and press the [CLOCK BUTTON] to clear all Step Rolls for the current
active sequence(s).
Clear Step Shifts
Hold the [EDIT BUTTON] and the [RESET BUTTON] and press the [STEP SHIFT BUTTON] to clear all Step Shifts for the current
active sequence(s).
Clear Mutes
Hold the [EDIT BUTTON] and the [RESET BUTTON] and press the Yellow or Red [CHANNEL BUTTON] to turn off Channel Mute
for the pressed channel.
Clear Step Condition
Hold the [EDIT BUTTON] and the [RESET BUTTON] and press the [OCT+ BUTTON] to clear all Step Conditions for the current
active sequence(s).
Clear Step Condition
Hold the [EDIT BUTTON] and the [RESET BUTTON] and press the [OCT- BUTTON] to clear all Step Chances for the current
active sequence(s).
Clear a Step
Hold the [EDIT BUTTON] and the [RESET BUTTON] and press any of the [TOUCH PADS] to clear all Step Values associated
with that step for the current active sequence(s).
4 Voltage Lab 2 Touch Controller