6
Basic User Interface Information:
The interface utilizes a knob per function operation workflow.
Each of the buttons cover two functions. The function written below the button in WHITE is the main function that happens
when the button is pressed.
Each section, the Voltage Lab 2 Voice and Touch Controller 2, has its own [EDIT] button.
For any button in the Voice section, holding [EDIT/ARP NOTE BUTTON] (bottom left of the Control section) and pressing any
button triggers the alternate function written below the button in YELLOW.
For any button in the Touch Controller section, holding [EDIT BUTTON] (3rd button from the bottom of the Controller section.)
and pressing any button triggers the alternate function written below the button in YELLOW.
The Voltage Lab 2 is a fully modular instrument. Patch cables are needed to hear a sound.
Input Jacks are labeled with GREEN text and output jacks are labeled with WHITE text. The output volume knob can be
patched using the output input [O.IN JACK] and patching out of the [MAIN OUT JACK] (bottom right of Output section) into
a mixer or DAW.
2 Voltage Lab 2 Overview
To Next Page
Loading...
